Roof safety systems in Australia are important when working on your roof. The ladders and the roof can be very hazardous. In this post, we have a few safety tips you should consider when doing your roof work or inspection. You should follow these tips to limit the hazards and ensure that you work in a safer environment.
Don’t be a hero
You should never work on the roof alone. In case of an accident, you should have someone around to help you.
Position your ladder properly
You should ensure that your ladder is on a solid and level surface. Add a ladder leveller if your roof is uneven. If the feet of your ladder are in dirt or grass, dig small holes for the feet to prevent your ladder from sliding on dirt or grass. If the ladder is on a deck or patio, attach a board behind the ladder’s feet to prevent it from sliding and slipping on the surface. The ladders you use should meet the roof safety system Australian standards.
The ladder should be always extended at least 3 rungs above the point of contact on the gutter so that you can reach it during the dissension approach.
Never work on a wet roof
In case of a wet roof, always wait for it to dry. The roof can be slippery and this can worsen the condition.
Use a safety harness
You should attach a safety harness to a permanent roof anchor point on the roof’s ridge to prevent a nasty fall.
Wear safety boots or shoes with good traction
Safety boots or shoes will help reduce slipping on the roof. You should also wear a hard hat and eye protection. If you are doing repairs yourself, make sure a professional inspects your roof safety systems in Australia for you.
